강서기의 얼리스토리

IMPORTANT UPDATE: Many comments on sites that have blogged this post seem to be getting the wrong end of the stick. This is not connecting to a remote desktop on another machine! This is x11 and LXDE Desktop running LOCALLY on the G1 device, the reason I had to connect back to LOCALHOST using VNCViewer (also running LOCALLY on the device) is because there are no drivers available. This circumnavigates the need for any special drivers.

Now back to business!


It's official you can run X-Windows and your choice of GUI (Gnome, KDE, IceWM etc on an Android device!

Screenshots are below!!

Here are instructions about running X-Windows and more specifically the LXDE Desktop GUI on the G-1.

LXDE is an energy saving and extremely fast and performing desktop solution. It works well with computers on the low end of the performance spectrum such as new generation netbooks and other small mobile computers

While IceWM, performance-wise runs the fastest - LXDE is also pretty good, and just plain 'prettier!

I have included options for either Desktop in the instructions below.

Prerequistes; Debian Shell instructions here: http://www.androidfanatic.com/cms/community-forums.html?func=view&catid=9&id=2248 (UPDATED)

Also if your 'debian.img' file is a little small you may want to resize it - instructions here:

http://www.androidfanatic.com/cms/community-forums.html?func=view&catid=9&id=1610

You need three basic packages:

From the Android OS:
Download VNCviewer for Android from our repo here:

http://www.androidfanatic.com/cms/unofficial-app-repo.html?func=fileinfo&id=16

or from google here:

http://code.google.com/p/android-vnc-viewer/

Now copy the .apk file to your sdcard and then run 'Apps installer' from the Market to install that.

From the terminal, boot your debian shell and then type:

apt-get install tightvncserver (return)

apt-get install lxde (return)

or if you want a really basic desktop use IceWM:

apt-get install icewm (return)

Now you need to setup your vncserver

at the prompt type:

export USER=root (return)
vncserver -geometry 480x320 (return)

This will create an x-windows session and a startup file
in the /root/.vnc/ directory. Vncserver will also ask you to set up two passwrds. You will need the first password to log in, but just say no to the second password.
The next thing to do is to kill the session you just started: vncserver -kill :1

This is so you can edit the startup file to set it up correctly.

go to /root/.vnc

type

nano xstartup


comment out the line for xsession:

#/etc/X11/xsession

add these two lines:

icewm &
lxsession

or if you decided to go for IceWM instead:

icewm &
xterm

save the file (trackball then 'o', and exit nano (trackball then 'x'.

Then restart an x windows session by vncserver ( you should kill it after you are done with x-windows later on).

This next bit does some housekeeping and sets up the VNC service each time you boot your debian shell - saves messing about everytime!

Now back inside your debian prompt you need to edit your /root/.bashrc file

cd /root
nano .bashrc

Add the following near the top of the file:

export USER=root
cd /
rm -r -f tmp
mkdir tmp
cd /
vncserver -geometry 480x320

(this sets your resolution - you can change this if you will be connecting via your computer).

save the file (trackball then 'o', and exit nano (trackball then 'x'.

Type 'exit' to exit the Debian shell.

reboot the phone.

Once rebooted go into Terminal and boot yor Debian shell.

Press the HOME button to revert back to the Android OS while leaving your Debian shell running.

Open androidVNC from your android programs menu.

Connect to 'localhost' port '5901' and enter your password.

Viola, you now have XWindows running on your phone. Obviously you can connect to your phone's new desktop GUI with a VNC viewer from your computer too jsut enter it's ip address instead of localhost.

To make the cursor work with your finger:

Press the MENU button on your device and select 1:1 then just press the trackball ONCE!

Now whenever you want a proper x-windows Desktop GUI right there on your phone, just run the debian shell with 'bootdeb' and it sets up your vncserver. Then just press home to leave it running and get back to your android menu, where you can choose to VNC directly onto it.

Cool eh?

When you are finished just exit androidVNC, if you want to get back to your Debian shell, HOLD DOWN the home key to bring up your running processes and switch to it.

What the heck, you could even install GNOME or KDE but it may be a little slow! I can't be arsed to try it, but if you can, be sure to let us know how it goes.

Your videos and photos of your device running X are welcomed. As usual if you like this, use the SHARE button below.

HTC서 만든 구글 안드로이드폰 G1 국내에서 판매될 수 있을까 ?

안녕하십니까 ? 강서기의 얼리어답터 Review 운영자 이강석입니다. 오늘은 뜬금없이 안드로이드폰을 이야기할까 합니다. 미국서 시판된지 벌써 1년이된 11월입니다. 유럽에서도 판매중이구요. 그런데 국내에서는 아이폰에 대한 뉴스만 떠들석 안드로이드폰을 유통할 이동통신사가 없는가 봅니다. 관심이 없는 것일까요. 저두 어찌어찌 해서 아이폰과 안드로이드폰을 가지고 있습니다. 아이폰을 개인이 전파인증 후 이통사에 등록 사용하는 고객이 100명을 넘어서고 있는 시점에 저는 개인적으로 조루배터리인 아이폰보다 안드로이드폰이 마음에 드는데 나오기만을 기다리고 있습니다. ㅠㅠ;; 

제가 가지고 있는 모델은 블랙 색상 모델입니다. 자 사진으로 보시죠. 이미 제 지인분들은 제가 하고 들고다녀서 많이들 보셨으니...

손에 들고 있는 모습입니다. 크기를 아실 수 있겠죠

구글 검색 화면

실제 제품 박스의 모습입니다. 저는 달랑 본체만 있습니다.